- Remove the 2 hex. socket head screws and then
the passenger handgrips on the left and right.
License plate holder
- Remove the lower cover.
- Remove the four retaining screws (2 per side)
and disconnect the electrical connectors.
- In order to access the licence plate bulb it is suf-
ficient to remove the two retaining screws of the
rear cover from the support and to pull out the
complete bulb holder.
Air filter
- Remove the helmet compartment.
- Remove the straps of the oil vapour recovery
hose and the air bellows shown in the figure.
Nexus 500 euro 3 Chassis
CHAS - 349
To Next Page
Loading...
