Flyscreen
- Remove the 3 hex. socket head screws (when
reassembling, pay attention to insert the longest
screw in the middle position) then remove the
windshield complete from the rubber lips.
- Remove the plugs and remove the seals on the
2 lateral windshield support arms.
- Remove the plastic cover from the windshield
support, loosening the 5 screws shown in the fig-
ure.
- Disengage the 7 retaining tabs (3 with the shield
back plate, 4 with the shield).
Once the 4 lateral tabs have been released it is
sufficient to separate the upper part from the lower
part and to pull it carefully upwards.
Nexus 500 euro 3 Chassis
CHAS - 355
To Next Page
Loading...
