Cooling forced-circulation fluid cooling by
means of a centrifugal pump driven
by the crankshaft
Lubrication with lobe pump (inside the
crankcase) chain-driven and
double filter: mesh and paper
Electronic ignition Consisting of a capacitor discharge
ignition microprocessor with a
built-in AT coil and variable
advance
Air filter Sponge, soaked in a mixture (50%
SELENIA Air Filter Oil and 50%
unleaded petrol).
Exhaust silencer Absorption type, with a catalytic
converter and a system of air
intake to reduce polluting
emissions.
CAPACITIES
Fuel tank Plastic, 8.5 l tank (estimated value)
including the fuel reserve ~ 1.7 l
Engine oil Capacity: 1.1 lt. dry; 1.0 l oil filter
change
Rear hub oil Capacity ~ 150 cm³
Cooling system fluid 0.7 lt
71
To Next Page
Loading...
