1: Rest the vehicle on its centre-stand, «E», ensuring the rear wheel is not touching
the ground.
2: Maintain the throttle twist-grip in the idle position.
3: Insert the key into the ignition key-switch, «D», and turn it onto the «ON» position.
4: Press the start button, «A», whilst pulling either the rear, «B», or front, «C», brake
lever.
CAUTION
DO NOT CARRY OUT THESE OPERATIONS IN CLOSED AREAS SINCE EX-
HAUST GASES ARE TOXIC.
CAUTION
DUE TO THE HIGH TEMPERATURES THE CATALYTIC CONVERTER CAN
REACH, ALWAYS TAKE CARE, WHEN PARKING THE VEHICLE, THAT THE EX-
HAUST DOES NOT COME INTO CONTACT WITH FLAMMABLE MATERIALS, TO
AVOID SERIOUS BURNS.
24
To Next Page
Loading...
