Lubrication Engine lubrication (piston,
cylinder, crankshaft, main
bearings) with mixer oil.
Cooling Forced-circulation coolant system.
Transmission With automatic converter with
expanding pulleys having torque
control, V belt, automatic
centrifugal clutch, gear reduction
unit and transmission
compartment with forced air
circulation cooling (only for the
liquid-cooled version).
Oil mixer reservoir Plastic, with a capacity of ~ 1.6 lt
(including a ~0.6 lt reserve).
Rear hub oil Quantity: approx. 75 cm³
Topping up mixer oil tank Topping up oil tank: 0.7 ÷ 1 l
Gas tank In plastic, 7 lt. capacity
(approximate value) including the ~
1.7 l. reserves.
Front suspension Upside-down telescopic fork with ø
30mm stanchion and dual-effect
damper.
Rear suspension With coaxial spring and hydraulic
shock absorber. Chassis to engine
support with swinging arm.
Wheels Light alloy rims:
FRONT 3.00 x 14"
REAR 3.50 x 13"
Front tyre Tubeless 120/70-14"
60
To Next Page
Loading...
