Gilson pipetman - 18 SPECIFICATIONS

- 26 -
18 SPECIFICATIONS
PIPETMAN M is a high quality pipette that of-
fersexcellentaccuracyandprecision;itisfully
compliantwithISO8655andisCEmarked(for
IVDandEMCdirectives).
The gures given in the“Gilson Maximum
Permissible Errors” table were obtained
using “PIPETMAN TIPS”.Theseguresareonly
guaranteed when using Genuine PIPETMAN
TIPS.
Each pipette is inspected and validated
by qualied technicians according to the
Gilson Quality System. Gilson declares that
its manufactured pipettes comply with the
requirements of the ISO 8655 Standard, by
type testing. The adjustment is carried out
understrictlydenedandmonitoredcondi-
tions(ISO8655-6):
• Basisofadjustment,Ex.
• Referencetemperature,20°C
• Relativehumidity,50%
• Barometricpressure,101kPa
• Useofdistilledwatergrade3(ISO3696)
• Ten measurements for each test volume,
whichareNominalVolume,50%ofNominal
Volumeand10%ofNominalVolume.
(tested mode: PIPET, speed 6 with PIPETMAN Tips)
Maximum Permissible Errors
Model PIPETMAN Volume Gilson ISO 8655
(Reference) tips used Systematic Random Systematic Random
error (L) error (L) error (L) error (L)
P8x20M
Min. 1 ± 0.08 ≤ 0.05 ± 0.4 ≤ 0.2
(F81005) DL10
P12x20M
10 ± 0.15 ≤ 0.10 ± 0.4 ≤ 0.2
(F81006)
Max. 20 ± 0.25 ≤ 0.12 ± 0.4 ≤ 0.2
P8x200M
Min. 20 ± 0.50 ≤ 0.16 ± 3.2 ≤ 1.2
(F81007)
D200
P12x200M
100 ± 1.00 ≤ 0.30 ± 3.2 ≤ 1.2
(F81008)
Max. 200 ± 2.00 ≤ 0.50 ± 3.2 ≤ 1.2
P8x300M Min. 10 ± 1.00 ≤ 0.18 ± 8.0 ≤ 3.0
(F81011)
D300
30 ± 1.00 ≤ 0.18 ± 8.0 ≤ 3.0
P12x300M 150 ± 1.50 ≤ 0.375 ± 8.0 ≤ 3.0
(F81012) Max. 300 ± 2.40 ≤ 0.45 ± 8.0 ≤ 3.0
Maximum Permissible Errors
Model PIPETMAN Volume Gilson ISO 8655
(Reference) tips used Systematic Random Systematic Random
error (L) error (L) error (L) error (L)
P10M Min. 0.5 ± 0.04 ≤ 0.013 ± 0.12 ≤ 0.08
(F81001) DL10 1 ± 0.025 ≤ 0.012 ± 0.12 ≤ 0.08
5 ± 0.060 ≤ 0.020 ± 0.12 ≤ 0.08
Max. 10 ± 0.080 ≤ 0.025 ± 0.12 ≤ 0.08
P20M Min. 2 ± 0.075 ≤ 0.025 ± 0.20 ≤ 0.10
(F81002) D200 10 ± 0.100 ≤ 0.035 ± 0.20 ≤ 0.10
Max. 20 ± 0.150 ≤ 0.05 ± 0.20 ≤ 0.10
P200M Min. 20 ± 0.40 ≤ 0.15 ± 1.60 ≤ 0.60
(F81003) D300 100 ± 0.80 ≤ 0.22 ± 1.60 ≤ 0.60
Max. 200 ± 1.00 ≤ 0.26 ± 1.60 ≤ 0.60
P1000M Min. 100 ± 2.50 ≤ 0.4 ± 8 ≤ 3.0
(F81004) D1000 500 ± 3.50 ≤ 0.7 ± 8 ≤ 3.0
Max. 1000 ± 5.00 ≤ 1.1 ± 8 ≤ 3.0