Gilson pipetman - 11 GOOD LABORATORY PRACTICE FEATURES; 12 PIPETMAN M POWER MANAGMENT; Battery Charging

ENGLISH
- 15 -
11 GOOD LABORATORY PRACTICE FEATURES
Your PIPETMANMisfullycomplianttoISO8655standardandisCEmarked(forIVDandEMCdirectives).
PIPETMAN M includes the following GLP features.
General
• Lockablevolume.
• Usefulvolume-rangeisprintedonthepush-button.
• Volumerangeisdisplayedonthescreen.
• Serialnumberisengravedonthebody(handle)ofthepipetteandencodedinthermware.
• Barcode:ontheboxandwiththecerticate(canbetransferred).
• Personalizationbynametags(formarkingapplicationand/orusername),seeChapter10.
Cycle counters
• Fromlastvolumesetting(tocountthenumberofcyclesinthecurrent“run”).
• Frommanufactureandsincethelastservice(seeChapter14).
• Byindicators(R1,R2,R3…Rx)eachtimepipetteisreadjusted.
• Maintenanceintervalscanbespeciedbyweeksornumberofcycleselapsed.
Alarms
• Lowbatterywarning.
• Serviceisoverduewarning(seeChapter14).
• ServiceAlertcanbeset“On”or“O”.
12 PIPETMAN M POWER MANAGMENT
The PIPETMANMbatteryhasbeendesignedtoensure900pipettingcycles(750forPIPETMANMMulti
200µLand300µL)atmaximumspeed(uptonine96wellplates)betweentwochargecycles.Forser-
vice continuity when needing more capacity, your PIPETMAN M can also be used while charging with
the same performance as a fully charged pipette!
Battery Charging
PIPETMANMcharges80%ofitsfullbatterycapac-
ity in less than an hour, it takes three hours to fully
charge the battery.
 Charge your pipette by using the power supply:
- Connect the AC adapter to a suitable AC
power supply
- PlugtheadapterintotheUSBportof the
pipette.
- The pipette starts charging.
Stand adapter
Plug
USB port