25mm-diameter range and the verge of electrode absorbing bowl. Press absorbing balls of
chest electrodes to fix the chest electrodes to certain place.
Conductive paste coat should be separated from each other, chest electrodes should not be
contacted each other to avoid short-circuit.
The left leg need not share an electrode with the right one.
When the limbs electrodes are installed, the electrodes should be fixed to tenderness skin
of feet and hands. Clean the skin where the electrode is fixed with alcohol, then lay a little
conductive paste to the skin. The side which has sheet metal should be placed to the inside
of the limbs (As Figure 18).
After placing the electrodes, patients should keep relaxed. Muscle should not be forced to
To Next Page
Loading...
General