EasyManua.ls Logo

Gima CONTEC 8000 - 8.2 ECG Sampling Procedure

Gima CONTEC 8000
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
4
V4: The midline of left armpit, and the fifth ribbing clearance.
V5: The back spine line, and the fifth ribbing clearance level. Use electrode piece as
electrode and join the lead lines by connection line
V6: The right scruff
Limbs electrodes placement positions are as following:
RA: Right arm
LA: Left arm
LL: Left leg
RL: Right leg
6.3 Electrode Installation Instructions and Precautions
Make sure to insert lead cables following the sequence labeled on the recorder.
As the weather of the north in the winter is cold, the skin exposed in the air easily produces
the muscle tremble. So the best temperature indoor is above 16to reduce EMG
interference.
During installing electrodes, we propose to install the chest electrodes first, then the limbs
electrodes.
When placing the electrodes of chest lead, use proper force to avoid the balls falling off
during sampling and gore instance to the patient after sampling.
When placing the electrodes of chest lead, clean the chest skin with alcohol to remove the
skin oil and fat. In the North or the dry air circumstance, it is better to lay a little
conductive paste to enhance the conductivity capability. Smear conductive paste to the