You can input patient information in this dialog, which is convenient to manage and query the
case in future. You can also input the items you want, or input nothing to enter the sampling
module directly. The item of time is always the current time. You can select sample type in
“Sample Style”, or set it in “System Settings”, which can get the default sample type in next
sampling and time you want to sample. Note: Item1/Item2 ……are user-defined items. You can
define them in "System Settings" dialog. For example, patient telephone number can not be
printed in report. But if you change "Item1" to "patient telephone number" in "user-defined"
setting, and select "Print", this information will be printed. (Refer to "customized settings" in
The following is the sample selection information. Click the mouse to select the sample style you
Wilson: 12 leads Wilson can be selected to test 12 leads ECG, FCG, HFECG, QTD, HRV, STLE,
HRT and PMECG. Sample time must be more than 3s. It is recommended that sample time
should be set to more than 20s when performing FCG analysis.
Frank: it is usually used to test VCG, SAECG and TVCG. The sample time is generally more
than 3s. It is recommended that the sample time should be set to more than 5min when
You can set time sampling and select sample time, when it arrives to the time, the system will
a
utomatically stop sampling.
To Next Page
Loading...
General