Gima CONTEC 8000 - Page 54

4
5
Figure 25
During pre-sampling phase, the wave is yellow, waveform quality can be observed, the positions
of electrodes and leads can also be adjusted. If the waveform interference is too big, then adjust
by “Filter Settings” to get stable and clear waveform.
In some cases, the quick print is required. Click "Real time print" to print directly. Notice: if the
ECG data is deficient for one page, the "Real time print" button will be gray and not be used.
Click "Start" button to sample after wave is clear (As Figure 26).