Gima CONTEC 8000 - Page 75

6
6
Enable filter, baseline filter, EMG filter, HR prompt sound, calculate VCG, device type, Bk Net
Paln and Lead Standard can be set in “Signals Processing” shown as Figure 44.
Figure 44
The interference arisen from AC can be filtered after selecting "AC filter". If "Baseline Filter"
and "EMG filter" are selected, the ECG wave will be better, but at the same time they will affect
the ECG signal in some degree. So we propose to choos them cautiously.
The items set in “Signals Processing” will be applied to actual sampling automatically and