You can adjust the beginning and end points of P wave and T wave, the beginning point of Q
wave and the end point of S wave by adjusting line P1, P2, Q, S, T1, T2. If the positions of the
six points are exact, the analysis result will be more accurate. The data on the right bottom
includes P Width, P-R Interval, QRS Width, ST-Segment width, T Width, QT Interval.
You can click "I", "II", "III", "aVR", "aVL", "aVF", "V1", "V2", "V3", "V4", "V5", "V6" or
"X","Y","Z" at the right of lead to display corresponding lead. Select “All” to display all leads.
The main analysis lead is displayed as default
Click "OK" after adjusting, the system will automatically diagnose according to the position of
every characteristic point adjusted by users, and store data in file.
To Next Page
Loading...