13
Table 4-2-4
Note: You shall not set up time powering on when the device is in record status.
4.2.5 Record Setup
1) Not in record status,the record setup menu is showed as Figure 4-2-5-1.
It prompts whether to begin record or not. Select YES to exit, it access the
record interface (as Figure 4-2-5-2) to save and the record indicator REC dot
ashes, the “Recorded Times” records the recorded time.
Select NO to exit, it will not record.
Figure 4-2-5-1 Starting record menu
Figure 4-2-5-2 Record interface
ENGLISH
Callout Function Instruction
1 Set Month Month setup, 1~12 can be selected.
2 Set Day Day setup, 1~31 can be selected.
3 Set Hour Hour setup, 0~23 can be selected.
4 Set Minute Minute setup, 0~59 can be selected.
5 Record Record duration setup, 1~10 can be selected
and default is 8, unit:hour.
6 Are you sure? Conrming information, NO/YES can be selected,
YES: conrm NO: cancel
7 Exit Exit to the upper-level menu. When exit in YES
status, the setup you have done takes effect.
To Next Page
Loading...
Need help?
General
