15
4.2.7 Time Setup
Time setup menu is showed as Figure 4-2-7.
Figure 4-2-7 Time setup menu
Table 4-2-7
Note: You shall not set up time when the device is in record status.
4.3 Sensor Connection
4.3.1 Nose Air Flow Monitoring
Unpack the Nasal cannula,wrest down the screw cap following Figure 4-3-1-1,
then insert the Nasal cannula in its upper-right jack and screw down.
Insert the tie-in in sleep apnea screen meter, and the oxygen-absorbing apparatus
in the nose, with oxygen-dividing connection tube round between the nose and
chin. Adapt orientation circle to a comfortable position, then power on, and after
serval seconds, the waveform is stable and you can examine respiration status.
ENGLISH
Callout Function Instruction
1 Set Year Year setup, 2010~2099 can be selected.
2 Set Month Month setup, 1~12 can be selected.
3 Set Day Day setup, 1~31 can be selected.
4 Set Hour Hour setup, 0~23 can be selected.
5 Set Minute Minute setup, 0~59 can be selected.
6 Are you sure? Conrming information, NO/YES can be selected,
YES: conrm NO: cancel
7 Exit Exit to the upper-level menu. When exit in YES
status, the setup you have done takes effect, at the
same time display the effected time.
To Next Page
Loading...
Need help?
General
