Gima RS01 - Page 9

9
(2) Pulse rate value display
Indicator: PRbpm
Instruction: Put the nger into the SpO2 probe,and the corresponding pulse
rate value will be displayed here.
(3) Bar graph display
Indicator:
Instruction: Put the nger into the SpO2 probe, and pulse beat will be displayed
here.
(4) Nose air ow display
Indicator: FLOW
Instruction: Real-time display nose air ow waveform.
(5) SpO2 plethysmogram waveform display
Indicator: SpO2
Instruction: Real-time display SpO2 plethysmogram waveform.
(6) Pulse sound indicator
Indicator:
Instruction: The former indicates pulse sound is on, while the later indicates
it is off.
(7) Prompt sound indicator
Indicator:
Instruction: The former indicates prompt sound is on, while the later indicates
it is off.
(8) Battery capacity indicator
Indicator:
Instruction: It indicates battery capacity, it indicates that the power is low when
appears and ickers.
(9) Time display
Indicator: 08:55
Instruction: Here it indicates real-time clock.
(10) Record indicator
Indicator: REC
•
Instruction:
•
ash indicates it is saving data.
(11) Recorded time display
Indicator: Recorded time: 00:00:01
Instruction: The device is recording the record time (hour:minute:second).
(12) SpO2 alarm low limit value display
Indicator: 85
Instruction: SpO2 alarm low limit value.
ENGLISH