GIRBAU ED340 - Program Execution Mode; Before Starting a Program

Program execution mode 16
Code no. 576017
Rev. nº 02/0415
4. PROGRAM EXECUTION MODE
4.1. Before starting a program
 Group the fabrics to be dried into homogeneous loads. Avoid
mixing articles of different thicknesses and moisture level, since
this will slow down the drying to the detriment of fine materials.
 To aid the movement of air through the inside of the drum, the
load must not exceed the nominal capacity.
Nominal capacity by models. (Load ratio 1/20):
CAPACITY
MODEL
ED260
ED340
ED460
ED660
kg
13
17
23
33
lb
28.7
37.5
50.7
72.8
 Check labels and/or characteristics of the garments or fabrics to
be dried and choose a program in accordance with these
characteristics.
 Do not dry linen with accessories that cannot be machine dried.
Select a program
The display will show the price of the selected program.
Very hot program
Hot program
Warm program
Program pause
Making the payment for the program.
 This operation has multiple modes depending on the option
installed in the dryer:
Inserting coins (1 or 2 slot coin meter box)
Inserting tokens.
Payment by card
Payment at central vending unit
…/…
 Use the method of payment that is appropriate for the
characteristics of the dryer.
 Confirm the start command by pressing the key corresponding to
the selected program again (machines with the CONFIRM
START option active; OPTIONS menu, section 7.1.2).
 Once the payment for the program has been made, the dryer will
start up.
 Further information regarding the payment modes can be found
in Chapters 7 and 9.