Information menu 34
Code no. 576017
Rev. nº 02/0415
7.3. Access codes
This allows the user to change the access code.
Initial code: 12341234
Entering the new code.
Press EIGHT keys on the program selection keypad in an established order.
Pressing a key will display a
*
on the screen.
The new code will be the repetition of the keys pressed in the same order.
8. INFORMATION MENU
This provides information on the dryer’s characteristics.
It records operating settings and incidents during the life of the machine.
Initialising the values of the three counters is an operation reserved exclusively for the Authorised Technical
Service.
General information
Machine model: Indicates the model of the dryer.
Program version: Displays the version of the software installed on the machine.
Usage counters
Provides information on:
Machine operating hours
Total number of programs run.
Program counters
This indicates the number of times each program has been run.
Very hot
Hot
Warm
Alarm counters
This contains al list of all the machine’s alarms and the number of times they have been triggered.
See the list of alarms in Chapter 10
To Next Page
Loading...
