Automatic Close Function
Glidermatic™
Commercial Door Operator
User Manual
12
CAUTION:
It is essential that a supplementary safety device such as a Sensing Edge or Photo Electric Cell be fi tted
when the automatic close function is in use to prevent injury or entrapment
The Glidermatic operator can be confi gured to automatically close the door after a prescribed period of time
up to 12 minutes
Enable Automatic Close (JP4)
To enable the Automatic Close Function, move Jumper on JP4
A/C terminal from OFF to ON
Adjust timer
Timer can be adjusted using the potentiometer A/CLOSE to
achieve a maximum time delay of 12 minutes
Always disconnect power to unit BEFORE making any setting changes.
CAUTION:
www.garagedoorsonline.co.uk
To Next Page
Loading...
