Manual Operation
In the event of power failure or situations where manual operation of the door is required. Manual
operation is activated by use of the Manual Release Lever. Activating the Manual Release
Lever will automatically disconnect electrical power to the motor. The motor will not operate
unless the lever is fully engaged in the electric operation position.
When possible activate the manual release only when the door is closed. Weak
or broken springs may allow the door to fall rapidly, causing severe injury or even
death. In all cases stand clear of the door. In the event that the door appears to
fall a qualifi ed service technician will be required to adjust the spring tension
WARNING:
When normal electric operation is required, return the lever to the Electric Operation position.
Engage the spring loaded release pin by carefully moving the door in either direction until pin
engagement is noted and the unit is locked in position
Glidermatic™
Commercial Door Operator
User Manual
5
Manual
Release Lever
Electric Operation
Manual Operation
www.garagedoorsonline.co.uk
To Next Page
Loading...
