German Light Products GmbH JDC1
User Manual Rev. 1.0 23
6 Cleaning and Maintenance
6.1 Suggested Maintenance Intervals
The cleaning schedule depends on the operating environment. The intervals
below are suggestions from our experience with typical installations. Adjust as
necessary.
6.2 Cleaning
JDC1 components require occasional cleaning to prevent the buildup of dust,
dirt, and smoke fluid residue. Pay special attention to the air vents and glass
plate. Failure to keep the fixture clean will significantly reduce light output and
may cause damage. Regular cleaning will ensure the maximum performance
and reliable operation.
The glass plate may be cleaned with household or automotive glass cleaning
products.
6.3 GLP Service and Support
Contact information for the nearest GLP service and suport is available online
at www.glp.de/en/service, by email at info@glp.de, or by telephone at the
following numbers:
GLP Germany: +49 (7248) 927 19-55
GLP N. America: +1 818 767-8899
GLP U.K.: +44 1392 690140
GLP Asia: +852 (3151) 7730
GLP Nordic: +46 737 57 11 40
WARNING! Any service operation that requires removal of a cover shall
be performed by a professional service technician with the tools, skills,
and personal protective equipment to maintain high-powered lighting
equipment safely and efficiently.
To Next Page
Loading...
