Need help?Do you have a question about the GLP JDC1 and is the answer not in the manual?
Details hazards that could result in serious injury or death due to improper use or conditions.
Outlines hazards that could lead to moderate injury from operating the fixture.
Provides notices to prevent damage to the product or other property.
Defines the intended applications and environments for the JDC1 fixture.
Illustrates and labels the key components and parts of the JDC1 fixture.
Describes the strobe tube element, its LED count, flash rate, and beam angle.
Details the RGB color plates, their LED segments, and wash effects.
Explains the available dimming curves and shutter effect options.
Covers the fixture's tilt range, control channels, and position feedback.
Describes how to change settings like PWM frequency and FX priority via DMX.
Information about the illuminated graphic LCD display and its functions.
Details the Camlock attachment points for fastening brackets and clamps.
Lists the items included in the JDC1 package, such as power cords and brackets.
Describes various mounting methods including upright, truss, and securing the fixture.
Details the importance and method of using a secondary safety attachment (safety wire).
Covers power supply requirements and DMX data connections.
Instructions on how to safely start and stop the JDC1 fixture.
Guidance on how to transport and store the fixture to prevent damage.
Explains the information displayed on the LCD and how to navigate through menu options.
Details the DMX channel assignments and commands for Mode 1 (Compressed Pro).
Details the DMX channel assignments and commands for Mode 5 (1Pix Pro).
Details the DMX channel assignments and commands for Mode 2 (Normal).
Details the DMX channel assignments and commands for Mode 4 (SPix Pro).
Details the DMX channel assignments and commands for Mode 3 (SPix).
Details specific DMX channel functions like offset, feedback, orientation, and PWM frequency.
Covers PWM frequency settings and various DMX modes like duration and dimmer flash.
Provides recommended intervals for cleaning the front glass, fans, and moving parts.
Guidance on cleaning the JDC1 to prevent dust buildup and maintain performance.
Lists contact information for GLP service and support centers worldwide.
Specifications for Strobe Panel LEDs and Strobe Tube LEDs, including type and count.
Details movement resolution, feedback, and connector types for signal and power.
Information on mains voltage, power consumption, ambient temperature, and shipping methods.
Provides the physical dimensions and weight of the JDC1 fixture.
Illustrates the fixture's dimensions with detailed measurements and diagrams.
General| Color Mixing | RGB |
|---|---|
| Control Protocol | DMX, Art-Net, sACN |
| Operating Temperature | -10°C to +45°C |
| Type | Hybrid strobe/wash |
| Light Source | LED |
| Strobe Effect | Yes |
| Power Input | 100-240V AC, 50/60Hz |
| Housing Material | Aluminum |
| Cooling | Fan |
To Next Page
