18SETTING THE METER
Setting the Alarm
The Alarm will only ring when the meter is turned off.
STEP 1
If the meter is off, press and release either button to power the meter on.
The screen will display the date, time, and the test strip symbol will begin
to blink.
STEP 2
Quickly press and release both left and right buttons together. You are
now in the “Set” Mode and the “Set” symbol appears at the top of the
screen with the different settings appearing below.
STEP 3
Use either the left or right button to scroll through settings. Once you see
that the Alarm setting is blinking, quickly press and release both the left
and right buttons together. You may now set your Alarm.
You may have up
to 4 Alarms.
To Next Page
Loading...
