Gmate VOICE - Replacing the Batteries; Battery Replacement Procedure; Important Battery Notes

46
REPLACING THE BATTERIES
STEP 1
Your Gmate® VOICE meter requires two 1.5 volt AAA alkaline batteries.
To remove the battery cover, squeeze the tab and lift.
STEP 2
Remove the old batteries and insert the new AAA batteries into the tray
correctly.
STEP 3
Insert the two hinges into the slots and press the battery cover down until
it clicks.
Dispose of used batteries according to your local environmental regulations.
Replacing the batteries may require you to reset the date and
time. It will NOT affect the meter’s memory or the other settings.
Important