22
SETTING THE METER
STEP 1
If the meter is off, press and release either button to power the meter on.
The screen will display the date, time, and the test strip symbol will begin
to blink.
STEP 2
Quickly press and release both left and right buttons together. You are
now in the “Set” Mode and the “Set” symbol appears at the top of the
screen with the different settings appearing below.
STEP 3
Use either the left or right button to scroll through settings. Once you see
that the Date & Time setting is blinking, quickly press and release both the
left and right buttons together. You are now in the Date & Time setting.
Setting the Date and Time
HINT: The left button will decrease the number and the right button will
increase the number.
To Next Page
Loading...
