20
SETTING THE METER
Setting the Timer
STEP 1
If the meter is off, press and release either button to power the meter on. The
screen will display the date, time, and the test strip symbol with begin to blink.
STEP 2
Quickly press and release both left and right buttons together. You are now
in the “Set” Mode and the “Set” symbol appears at the top of the screen with
the different settings appearing below.
STEP 3
Use either the left or right button to scroll through settings. Once you see that
the TIMER setting is blinking, quickly press and release both the left and right
buttons together. You are now in the TIMER setting.
Important
Setting the Timer on the meter will set an alarm reminder for you to test.
For example, if you would like the Timer to remind you to test 1 hour and
30 minutes after a meal, set the Timer to 1:30.
The Timer has to be pre-set before you test your glucose level.
The Timer will only ring when the meter is turned off.
To Next Page
Loading...
