he-Piece
Front Turn Signal Lamp Assembly
.
Remove the headlamp assembly as shown under
“One-Piece Composite Headlamp System” earlier
in
this section.
2.
Twist the bulb
socket to remove
it from the
headlamp
assembly.
3.
Pull the bulb straight
out
to remove it from
the socket.
4.
Push the new bulb into the socket until
it
snaps
into place.
5.
Put the bulb socket into the lamp assembly and twist
it
to
the right until it is tight.
6.
Put the headlamp assembly back into the vehicle.
Install the two ret;
ing
clips.
6-36
To Next Page
Loading...
