5. Reinstall the pin and
turn it to keep the
primary tilt lever
from moving
downward.
{CAUTION:
An unsecured cab could move suddenly
causing an accident or an injury. Be sure
the tilt cab is properly secured to the
chassis before moving the vehicle.
Lifting the Front Panel
To access the windshield washer fluid reservoir
and the clutch fluid reservoir, the front panel must
be lifted.
1. To lift the panel,
grasp the rear of
the release catch,
located at the bottom
of the instrument
panel, and pull it
toward you.
See Instrument Panel Overview on page 100
for more information on location of the
release catch.
247
To Next Page
Loading...
Need help?
General
