GMC T-Series 2007 User Manual

Ignition Positions
Use your ignition key to
start your vehicle. You
can turn the ignition
switch to four different
positions.
LOCK: This position allows you to insert and
remove the ignition key.
ACC (Accessory): This position lets you use
accessories when the engine is off.
ON: This is the position for driving.
The battery could be drained if you leave the key
in the ACC or On position with the engine off.
You may not be able to start your vehicle if
the battery is allowed to drain for an extended
period of time.
START: This position starts your engine.
Key In the Ignition
Never leave your vehicle with the keys inside, as it
is an easy target for joy riders or thieves. If you
leave the key in the ignition and park your vehicle, a
chime will sound, when you open the driver’s door.
Always remember to remove your key from the
ignition and take it with you. This will lock your
ignition and transaxle. Also, always remember
to lock the doors.
The battery could be drained if you leave the
key in the ignition while your vehicle is parked. You
may not be able to start your vehicle after it has
been parked for an extended period of time.
Starting the Diesel Engine
Automatic Transmission
Move the shift lever to PARK (P) or NEUTRAL (N).
The engine will not start in any other position – that
is a safety feature. To restart when the vehicle is
already moving, use NEUTRAL (N) only.
Notice: Do not try to shift to PARK (P) if your
vehicle is moving. If you do, you could damage
the transmission. Shift to PARK (P) only when
your vehicle is stopped.
66

GMC T-Series 2007 Specifications

General

Brand	GMC
Model	T-Series 2007
Category	Automobile
Language	English