Step Action Yes No
POWER SOURCE: NAO OR UNIVERSAL POWER SUPPLY
1. Unplug NAO (or Universal) power supply jack from DLC cable.
2. Using a digital multi-meter (DMM), verify voltage output at
power jack.
Do you have battery voltage output?
Go to Step 2. Replace NAO or
Universal power supply.
1. Remove DLC cable from Tech 2.
2. Plug in NAO (or Universal) power supply power jack to the VCI
power jack connector located at bottom of Tech 2.
Does the Tech 2 power on?
Replace DLC cable. Problem with Tech 2.
Contact Customer
Support.
1
2
To Next Page
Loading...