SECTION VIIA TECH 2 MAIN MENU & LIVE PLOT
2005 Tech 2 User’s Guide VII - 8
Figure VIIA-6
Set Units screen
F3: Self Test
Selecting F3: Self Test gives you access to the Tech 2 Self Test menu screen (Figure VI-5), which will help
you to verify that the Tech 2 is functioning normally. Refer to Section VI - Troubleshooting for more
information on this area.
Power Down Screen. After completion of any Self Test, return to the Tech 2 Self Test menu screen. After
pressing [EXIT], a screen will appear instructing you to turn the Tech 2 power off (Figure VIIA-7). Turn off
the Tech 2 and turn back on to continue.
Figure VIIA-7
Tech 2 power down screen
Tool Options continued on next page...
F2: Set Units
When you select the F2: Set Units option, a Set Units screen will appear (Figure VIIA-6). Use the up and
down arrow keys to change the Current Units Setting from English to Metric or vice versa, if desired. Press
[ENTER] to save your setting as the default.
To Next Page
Loading...