※ If the roller is not cleaned regularly,
- Film can be wound into the rollers.
- It contaminates the laminating results.
※ Roller Cleansing
- After laminating is finished, when the laminating roller temperature is below 80℃, sweep the roller with "cotton" rag and "isoprophile alcohol".
Caution : When cleansing the roller, use "isoprophilene alcohol" only.
Caution : after lamination, the laminating roller temp. is too high, if it would be contacted to body, this could be a cause of burn.
※ Main Body Cleaning
- Main body and cover should be cleansed with soft linen.
Caution : Segregate the power plug from the outlet. It can be a reason of fire flame.
Caution : Using flammable chemicals such as Acetone or Benzene can be a reason of fire flame.
To Next Page
Loading...
