GMP PROTOPIC III-540 - Metallic Sleeking; Spot Metallic Sleeking Setup and Foils

METALLIC SLEEKING
GMP METALLIC SLEEKING FOIL makes different effect on the printed area for highlight.
Conditions for METALLIC SLEEKING FOIL METALLIC SLEEKING FOIL
① GOLD
Model
Speed Set Temp.(℃) Pressure (MPa)
② SILVER
PROTOPIC II Series
3 110 0.5
(Table 3.1)
How to load the Foils (Picture 3.1)
(Picture 3.2)
NOTE : To have various sleeking effect of whole page/spot/hologram, etc.,
the sleeking bar is required.
How to install the sleeking bar, please refer to the "Main Device".
1.SPOT METALLIC SLEEKING
PROTOPIC III- 540
SLEEKING IDLE BAR
46/48