GMP PROTOPIC III-540 - Power and Installation Safety

IMPORTANT SAFETY INSTRUCTION
Do not connect or disconnect with wet hands, as this will cause an electric shock
Do not overload a power supply, as this will cause a fire and an electric shock.
Do not use a damaged plug or lead, as this could cause a fire or an electric shock
Do not use other voltage and power supply other than specified, as this will cause a fire and an electric shock.
Make sure plug is in the socket, as it could cause fire or an electric shock
Grounding is needed for your safety
A malfunction and losing electricity make an electric shock
Danger, Malfunction, loss of electricity could cause an electric shock
Do not pull the plug or bend improperly
Do not use materials near a naked flame
Do not use the machine in the sealed place.
Only use the specified power and voltage. It can be a reason of fire flame or an electricity fire flame.
Do not dissemble, make repairs or convert the machine. Contact your dealer for repairs
Ensure all hair, neckties, necklaces, are kept free of the feeding table to avoid injury
Do not convert the safety device and safety switch.
Do not spill any liquids on the laminator as this will cause damage and a possible electric shock
Do not use the flammable spray or flammable materials inside or outside the machine. As this could cause a fire.
Do not allow children use of this equipment
WARNING
GROUNDING
P
O
W
E
R
I
N
S
T
A
L
L
A
T
I
O
N
4/48