Gnet G-ON3 - withCLOUD

32
03. APPLICATION
S
MARTPH
O
NE C
O
NNECTI
ON
How to connect an Android smartphone
* If the connection fails due to a weak Wi-Fi signal, please
re-insert the Wi-Fi dongle and press the Wi-Fi button on the
device again. When standby mode is on, try it again.
2
3
Press the Wi-Fi® button on the dash camera to
enter standby mode with the voice message
“Registration standby mode” (last 2 minutes)
Touch the "+" to search for your
device - use the left and right arrows
scroll. Once your device has been
located select the "Connect" button.
[★] will indicate rst time connection
to the device.
4
The registration of the dash camera is completed
when you hear “User’s connected”.
After installing the G-net application
* G-net application is not available while cloud mode is on.
1