EasyManua.ls Logo

Gnet G-ON3 - Warranty Card

Gnet G-ON3
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setup Voltage Management-> LBP LBP On Setup Winter LBP O
Enable Set LBP Cuto Voltage to 12.3V
If the above setting is still blocked, Voltage Management Auto O
Set 3 hours.
In winter, when the weather is cold and the battery performance of the
car is weakened, the car may be discharged when the driving time is short.
Since the dashcam is a symbiotic car battery, the LBP function is activated
to prepare for discharge.
It is recommended to connect the power cable to the ACC (turn o when
the power is turned
If you have to park for 24 hours, please turn o the device. Even if LBP is set,
the battery may be discharged during long-term parking.
1. Always-on connection check
2. Conrm whether it is a 2-wire or 3-wire model (2-wire model does not apply
to items 2 and 3 below)
3. Cause of discharge
Vehicle battery discharge
81
TROUBLE SHOOTING

Table of Contents

Related product manuals