Our dashcam seems to have rebooted the LBP function to protect the car
battery. LBP is below the set voltage during parking
The Dashcam automatically shuts off to protect your vehicle's battery.
2-wire model: In case of the model you are using, there is no black box
start / stop detection line, so a certain voltage must go up and down to
divide the driving and parking.
-
3-wire model: In case of the model you are using, there is a Dashcam
start-up detection line to check the voltage value at the time of parking
and cut off the Dashcam power when it reaches the LCP voltage
setting value.
-
In winter, the weather can get cold and your car's battery performance
will weaken, causing frequent dashcam voltage interruptions.
1. Normal operation
1) Check the type of power cable
1ch models : GN700, G-BLACK
2ch models : G-ON, G-ON2, N2, X2, L2, GDR, IRONMAN, MATMAN, GK,
G-STYX, N2I, N2T, X2I, X2T
3ch models : G-ON3, G-STYX, X3I, GT700 3CH
4ch models : CP440, GT700 4CH
2)Description of LBP
When the battery power is off and the power is turned off
80
TROUBLE SHOOTING
R
UBLE SH
TING
To Next Page
Loading...
