go-e HOMEfix - Scope of Delivery

11111010
HOMEx 11 kW HOMEx 22 kW
Dimensions Approx. 15 x 25 x 9 cm
Weight 1.95 kg 2.47 kg
Connection cable
2 m, 5 x 2.5 mm²
for permanent connection
(type H07BQ-F)
2 m, 5 x 6 mm²
for permanent connection
(type H07BQ-F)
Connection Single-phase or three-phase
Rated voltage 230 V (single-phase) / 400 V (three-phase)
Mains frequency 50 Hz
Power grid types TT / TN / IT
Standby power 1.9 W (LEDs switched o󰀨) to 4.2 W (LEDs bright)
RFID 13.56 MHz
WiFi 802.11b/g/n 2.4GHz / frequency band 2412-2472Mhz
HOMEx 11 kW HOMEx 22 kW
Maximum charging power
11 kW
(16 A, 3-phase)
22 kW
(32 A, 3-phase)
Ampere and status display Readable via LED ring and app
Adjusting charging power
By button and app
Via charging current in steps
of 1 ampere between
6 A and 16 A
Via charging current in steps
of 1 ampere between
6 A and 32 A
Product specicationsProduct specications
Charging capacityCharging capacity
Permissible ambient conditionsPermissible ambient conditions
HOMEx 11 kW HOMEx 22 kW
Installation site
Indoors and outdoors,
without direct sunlight
Operating temperature -25 °C to +40 °C
Storage temperature -40 °C to +85 °C
Average temperature in
24 hours
Below 35 °C
Altitude Maximum 2,000 m above sea level
Relative humidity Not more than 95 % (non-condensing)
Impact resistance IK10
6. Scope of delivery 6. Scope of delivery
11 or 22 kW charging box
with 2 metres connection cable
Wall bracket
Mounting material
5x Dowel 8 x 40 mm
4x Screws for wall bracket 4.5 x 50 mm
1x Screw for U-piece 4 x 50 mm
1x U-piece (optional anti-theft device)
Spare fine wire fuse
• Type 2 cable (up to 22 kW) 2.5 m | 5 m | 7.5 m
• Type 2 cable holder
• Type 2 to Type 1 cable 7.4 kW 5 m
• RFID chips, pack of 10
• go-eCharger wall bracket
• Fine wire fuses, pack of 10
RFID chip
Reset card
4x 1x5x 1x
Optional accessories
7. Technical data7. Technical data