Goblin FIREBALL - Chapter 3, Components and Box

Page 4
Chapter 3, Components and Box
TOOLS, LUBRICANTS, ADHESIVES
*Generic pliers.
*Hexagonal Screw Driver, size 1.5, 2, 2.5mm.
*4.5, 5, 5.5mm Socket wrench.
*Medium threadlocker (eg. HA116-S)
*Strong retaining compound (eg. HA115-S)
*Spray lubricant (eg. Try-Flow Oil)
*Grease ( eg. Microlube GL261)
*Cyanoacrylate adhesive
*Pitch Gauge (for set-up)
*Soldering equipment (for motor wiring)
ADDITIONAL COMPONENTS REQUIRED
SG280 GOBLIN FIREBALL
*Speed controller: minimum 50A.
*Batteries: 6S – 1000/1250mAh.
*1 flybarless 3 axis control unit.
*3 cyclic servos ( Micro size ).
*1 tail rotor servo ( Micro sizes ).
*6 channel radio control system on 2.4 GHz.
The assembly process is described in the following chapters. Each chapter provides you with the bag you will need for that chapter.
The information is printed in RED color in the top corner of the page.
INSIDE THE BOX:
Main Box: Canopy, Landing Gear, Main Blades, Tail Blades,
Boom, Box 1, Box 2, Carbon Rod, Blade Holder.
Box 1: Motor , Servos & ESC for SG281.
Box 2: Bags.
MAIN BOX
BOX 1
BOX 2
SG281 GOBLIN FIREBALL COMBO
*Batteries: 6S – 1000/1250mAh.
*1 flybarless 3 axis control unit.
*6 channel radio control system on 2.4 GHz.
PRODUCT CARD
MANUAL