What to do if the cutter does not cut off the labels completely on Godex DT2 Barcode Reader?
If the cutter on your Godex Barcode Reader doesn't cut off labels completely, check whether the label is more than 0.16 mm thick.
Why the cutter does not cut off the labels in a straight line on Godex DT2 Barcode Reader?
If the cutter on your Godex Barcode Reader is not cutting off the labels in a straight line, check whether the label stock is positioned straight.
What to do if, when using the cutter, the labels are not fed through or cut off incorrectly on Godex DT2 Barcode Reader?
If, when using the cutter on your Godex Barcode Reader, the labels are not fed through or cut off incorrectly, verify the cutter has been correctly installed and that the paper guides are functioning correctly.
Important safety guidelines for operating and handling the printer.
Warning regarding battery replacement and disposal.
Lists all items included with the printer.
Provides detailed technical specifications for the DT2 and DT4 series printers.
Identifies and illustrates the main parts and components of the printer.
Step-by-step guide on how to correctly load label rolls into the printer.
Instructions for properly installing the label roll holder accessory.
Details how to connect the printer to a computer via USB or serial port.
Guides the user through the process of installing the necessary printer driver software.
Explains the function of the FEED button for label advancement.
Describes the meaning of different LED indicator lights and their statuses.
Details the procedure for automatically detecting and storing label dimensions.
Explains how to perform a self-test and interpret the test page output.
Lists common error codes, their beep patterns, and corresponding solutions.
Provides step-by-step instructions for installing the NetSetting utility.
Overview of the NetSetting software interface and its tabs.
Detailed guide on how to install the optional label dispenser.
Instructions for installing the optional cutter module.
Explains the importance and method for cleaning the printer's print head.
Provides steps to adjust the cutter to resolve paper jams.
Guidelines for using label stock with black marks and sensor compatibility.
Details the pinout and configuration for the RS-232 serial port interface.
Describes the USB port connector type and pin assignments.
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Print Width | 54 mm |
| Interface | USB |
| Type | Desktop |
| Supported Barcodes | Code 39, Code 128, UPC, EAN, QR Code, Data Matrix |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 20% to 85% RH (non-condensing) |
To Next Page
