12
To avoid overheating and deteriorating the flash head during stroboscopic flash, do not
use stroboscopic flash more than 10 times succession.
S1 Mode: S1 Slave Trigger Mode
• Lon press < > button for 2 seconds to enter the custom menu and press
<SET> button to choose OS. Then, turn the Select Dial to choose OFF/S1/S2.
• In S1 mode, the flash unit can function as a slave flash for creating multiple
lighting effects. It is respectively applicable to manual flash environment.
• In S1 mode, the flash unit will fire synchronously when the master flash fires, the
same effect as that by the use of radio triggers.
To Next Page
Loading...
