19
Wireless Flash Shooting: Radio (2.4G) Transmission
• The V1S attach to the camera is called the transmitter unit, and a V1S that is
wirelessly controlled is called the receiver unit.
• You can also wirelessly control the V1S set as the receiver unit with the
transmitter X1T-S or XProS (sold separately). For details on setting the transmitter
unit functions, see the transmitter’s instructions.
Using a flash (transmitter/receiver) with a radio transmission wireless shooting function
make it easy to shoot with advanced wireless multiple flash lighting, in the same way as
TTL autoflash shooting.
The basic relative position and operation range are as shown in the picture. You can
then perform wireless TTL autoflash shooting just by setting the transmitter unit to
<TTL>.
Positioning and Operation Range (Example of wireless flash shooting)
• Autoflash Shooting with One Receiver Unit
• Use the supplied mini stand to position the Receiver unit.
• Before shooting, perform a test flash and test shooting.
• The transmission distance might be shorter depending on the conditions such as
positioning of Receiver units, the surrounding environment and whether
conditions.
To Next Page
Loading...
