Godox V1S - Protection and Technical Data; High-Speed Sync Over-Temperature Limits; Key Technical Data Summary

30
Number of flashes what will activate over-temperature protection in high-
speed sync triggering mode:
Power Output Level
Times
1/1
15
1/2(+0.3, +0.7)
20
1/4(+0.3, +0.7)
30
1/8(+0.3, +0.7)
1/16(+0.3, +0.7
40
1/32(+0.3, +0.7)
1/64(+0.3, +0.7)
50
1/128(+0.3, +0.7)
1/256(+0.3, +0.7)
Other Protections
The system provides real-time protection to secure the device and your safety. The
following lists prompts for your reference:
Prompts on
LCD Panel
Meaning
E1
A failure occurs on the recycling system so that the flash cannot fire.
Please restart the flash unit. If the problem still exists, please send
this product to a maintenance centre.
E2
The system gets excessive heat. Please allow a rest time of 10
minutes.
E3
The voltage on two outlets of the flash tube is too high. Please send
this product to a maintenance centre.
E9
There are some errors occurred during the upgrading process.
Please using the correct firmware upgrade method.
Technical Data
Model
V1S
Compatible Cameras
Sony cameras (TTL autoflash)
Power (1/1 output)
76Ws
Flash Coverage
28 to 105mm
Auto zoom (Flash coverage set
automatically to match the lens focal
length image size)
Manual Zoom
Swinging/tilting flash head (bounce flash):
0 to 300° horizontally and -7° to 120°
vertically
Flash Duration
1/300 to 1/20000 seconds