Godox V1S - Comprehensive Specifications; Exposure Control & Sync Modes; Wireless Flash Specifications; LED Modeling Lamp & Power Supply

31
Exposure Control
Exposure control system
TTL autoflash and manual flash
Flash exposure compensation (FEC)
Manual. FEB±3 stops in 1/3 stop
increments (Manual FEC and FEB can be
combined)
Sync mode
High-speed sync (up to 1/8000 seconds
first-curtain sync, and second-curtain sync
Multi flash
Provided (up to 90 times, 100Hz)
Wireless Flash
Wireless flash function
Transmitter, Receiver, Off
Transmitter groups
M, A, B, C
Controllable Receiver groups
A, B, C, D, E (D/E group can be controlled
by X series flash trigger)
Transmission range (approx.)
100m
Channels
32 (1~32)
ID
01~99
Modeling flash
Fired with camera’s depth-of field preview
button
Auto Focus Assist Beam
Effective range (approx.)
Center: 0.6~10m / 2.0-32.8 feet
Periphery: 0.6~5m / 2.0~16.4 feet
LED Modeling Lamp
Power
2W
Color Temperature
3300K±200K
Power Supply
Power source
7.2V/2600mAh Li-ion batter
Recycle time
Approx. 1.5 seconds. Green LED indicator
will light up when flash is ready.
Full power flashes
Approx. 480
Power saving
Power off automatically after approx. 90
seconds of idle operation. (60 minutes if
set as slave)
Sync Triggering Mode
Sync Triggering Mode
Hotshoe, 2.5mm sync line