Godox V1S - Manual Wireless Flash Shooting; Setting Flash Mode to Manual; Setting Manual Flash on Receiver Unit

25
M: Wireless Flash Shooting with Manual Flash
This describes wireless (multiple shooting) using manual flash. You can shoot with a
different flash output setting for each slave unit (firing) group. Set all parameters on the
Transmitter unit.
Setting the flash mode to
<M>
Setting flash output.
1/2/3/4<M/A/B/C>
• Press Function
Button 3 < > Turn
the Select Dial to set
the flash output of
the groups. Press
Set Button to
confirm.
Taking the picture.
• Each group fires at
the set flash ratio.
Setting <M> Flash Mode
You can directly operate the Receiver unit to manually set the manual flash or
stroboscopic flash.
1. Setting the Receiver unit.
2. Setting flash mode to <M>
• Press <MODE> button so that <M> is displayed.
• Set the manual flash output.