GOK SmartBox 4 - Page 12

SmartBox
®
4 / SmartBox
®
4 PRO
12 / 28 part no. 28 400 57 d
Menu
Input function
Input value
2.Liquid
Select the medium
_______kg/m³
If the density of
the stored
medium is
unknown, the
reference
height can be
entered in
menu item
“10.Trim
height”
Medium
Density value kg/m³ (15 °C)
Heat. oil
845kg/m³ - default setting
Water
999kg/m³
Diesel
830kg/m³
Biodiesel
880kg/m³
RME, FAME
880kg/m³
Rape oil
915kg/m³
Palm oil
910kg/m³
Motor oil
865kg/m³
AdBlue
1090kg/m³
Regular
gasoline
743kg/m³
Premium
gasoline
750kg/m³
Density value
Enter a special density value
with different measuring range
3.Tank shape
Select Tank shape with [Enter]
Linear
Default setting
linear tank, rectangular tanks, vertical cylinders,
basement-welded steel tanks.
Cylinder
horizontal
cylindrical tank with arched ends
horizontal tanks, tubular tanks
typical shape for steel outdoor or buried tanks.
Ball-shaped
spherical tank; buried tanks with spherical
basic shape; frequently plastic buried tank (GRP).
Oval
oval basement tanks; typical shape of GRP
tanks and single-walled sheet metal tanks
Convex
Plastic battery tanks, convex,
slightly convex shape, alternative to linear
Concave
Plastic battery tanks, concave,
slightly concave shape, alternative to linear
Holed
plastic
Plastic tank with recess
Plastic tank with a large recess (hollow) in the center
(without tape bindings)
Tube w.
flat ends
Lying cylindrical tank with flat ends,
tube segment with straight end plates.
Typical tank shape for smaller diesel tanks.
Metal oil
tanks
Plate tank or plate tank battery
linear side walls, with semicircular arc top and bottom.