GOK SmartBox 4 - Page 24

SmartBox
®
4 / SmartBox
®
4 PRO
24 / 28 part no. 28 400 57 d
Comm-
and
Parameter
Description
Standard /
default value
#R
Quick additional inquiry addressed in
between to the inquiring mobile phone, e.g. by
the driver of the tank truck.
Read command to t
rigger an info SMS to the
inquiring mobile phone. The day counters for
the standard info SMS to the headquarter will
run on.
#M
Same as #R, but day counters are reset (#P).
This is useful e.g. if the tank is to be monitored
all the time by manual inquiry only.
#C
Query configuration
Query device configuration: Header; SW
version; main destination no.; reporting points;
serial no. of the device; field strength; credit
mode; SMS counter; Temp. limit value if set
with #TMP1 - #TMP4
Format: Header; Parameter; V6.00;
004917619808000; 10,2,40,2,0,5; 9308; 2; 9;
123; TMP=-99
#A
Query alarm texts and alarm bits
Query the stored #A1 parameters
Format: Header; Alarm-
Para; A1:0,Text
Alarm1; Alarm-Bits;(+); (PS) 05.02.604
(Modem-ID)
#TA
Query alarm numbers and alarm delay
The alarm numbers in the alarm chain set with
#TA= are read.
The parameterised delay (#Q=) between two
alarms is confirmed.
Format: Header; Alarm-
Tel;
004917619808000; 0049123456789; 20min
#Q
Acknowledge alarms. Sending alarms to the
subsequent alarm numbers is also stopped.
#Q+
Acknowledge alarms and subsequent OK
messages when alarms are cancelled.
#S=
#S=0
#S=1
#S=3
#S=2
#S=21
Determines the relay switching functions
Switch relay to OFF
Switch relay to ON
Relay deactivated - the relay is functionless
Relay active -switch status depends on the
measured value
Relay active+SMS - like #S=2 but with SMS

only
SmartBox
®
4