40
5.3.2 Registering the accelerator
To regulate the accelerator lever travel, use the regulation screws on the end of
the accelerator cable on the engine.
5.3.3 Registering the wheel release
Lever 9 fig.3 must have 2 mm of play before it begins to release the wheels. Use
the screw 11 fig.3 to regulate this play.
5.3.4 Registering the differential lock
Only for models with differential.
the differential lock lever 10 fig.3. in LOCKED position, must have a play of 2-4
mm.
When the lever is in RELEASE position, the wheel must be completely released.
To adjust this play, use regulating screw 12 fig.3.
5.3.5 Wheel pressure
TYRE INFLATION PRESSURE
Tyre Pressure
bar KPa
3.50-8" 1,1 110
4.00-8" 1,2 120
16x6.50-8" 1,0 100
18x6.50-8" 1,0 100
4.0-10" 1,2 120
5.0-10" 1,2 120
5.4 ELECTRIC SYSTEM
(Optional - For models Uno 8DS)
Before changing a fuse, eliminate the cause of the short circuit.
Change fuses with the same type of fuse rated at 15 Ampere.
Check battery clamp fixing performance and grease them with Vaseline. Keep
the battery clean and, if the tractor is be inactive for some time, store the battery
in a cool dry place.
To Next Page
Loading...
Need help?
General
