golmar Art 7/G2+ User Manual

6
MAIN MENU
ART 7T/G2+ MONITOR
If the device is in standby (screen switched off), to access the main menu, press either of the 2 buttons (located/
above the raised dots for the visually impaired) on the monitor. Then press the hidden button located just/
below the corresponding icon. The device will return to standby mode after 0 seconds without activity.2 #
Press the hidden button below icon to display the list of images recorded in the memory of the
device. If a MicroSD card is inserted in the monitor, images/videos will be recorded on the
MicroSD card (see pp. ).22-24
Indicates that the inserted Micro SD card must be formatted from the monitor. Access this
function by pressing the hidden button below icon to access the Micro SD card format
menu, then press the hidden button below icon to start formatting the Micro SD card.
To return to the main menu, press the hidden button belowbutton/
corresponding icons
. To exit without formatting, press the button below icon/ .
There are no images/videos pending viewing.
There are images/videos pending viewing.
Press the button below icon to display the image from the door panels and cameras connected to
the system. Note: This enables the door panel camera to be changed, the audio on the
corresponding door panel to be activated and the door to be opened (see p. 1 ).5
Press the button below icon to access the menu of the intercom between other monitors in the
same apartment or other apartments (see pp. - ).1 19 2
Press the hidden button below icon to make changes to the system settings (see pp. -1 ).7 4
Hidden button
pressing area
LED indicators
Raised dots for the
visually impaired
Press the hidden button below icon to enable disablefor 3 seconds and for 1 second to
the 'Do not disturb' function: If the monitor is in 'Do not disturb' mode, the ringtone on the
monitor does not sound when a call is received ( not “HZ” n p g )see e i a e 5 and the
notification icon will illuminate.
With the "Do not disturb" mode deactivated, a one-second press accesses the menu, allowing
you to set a "Do not disturb" mode time period (see pages to ), activate/deactivate the25 27
intercom between apartments (see page ) and set an "Automatic door opening" mode26
time (see pages to 2 ).26 7
Press the hidden button below icon to “stairs light” activation (SAR-G2+ & SAR-12/24 modules
required.
Notification
icons
09:27
23 23-09-20

golmar Art 7/G2+ Specifications

General

Brand	golmar
Model	Art 7/G2+
Category	Monitor
Language	English