Page 9
Clock Set
Use these buttons to
adjust the current time.
Use these buttons to
adjust the current day.
Setting the time & day are the first two steps after
sliding the Program Switch to SET.
Slide the Program Switch to the SET position.
This thermostat is preprogrammed from the
factory to operate 1 or 2-Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
PM
6:00
:
Su
Press NEXT
to advance
OWNER'S MANUAL
To slew the time more rapidly, push and hold the
COOLER or WARMER buttons.
TSTATG2152-2
PROGRAM
RUN OFF SET
NEXT
To Next Page
Loading...
